Gas Liquids Engineering Ltd Introduces New Carbon Capture Engineering Process

July 19, 2021 at 23:27

Calgary, Alberta based Gas Liquids Engineering Ltd is pleased to introduce a new carbon capture engineering process. The company is a privately owned engineering firm that has provided engineering services to companies all over the world from their Calgary offices since 1987.

Gas Liquids Engineering is an industry leader in the area of CO2 processing and sequestration, or CCS (Carbon Capture and Sequestration). With years of experience and having carried out more carbon sequestration projects than any other engineering firm on earth in the form of amine processing and geostorage, the company boasts a thorough understanding of the highly unique requirements for handling CO2. With over 30 years of successful sequestration projects involving CO2 and H2S (also known as Acid Gas Injection), Gas Liquids Engineering’s experience in the specialized requirements of CO2 systems makes them highly skilled in the processes, equipment selections and specifications required.

Carbon Capture Amine

Gas Liquids Engineering also developed the lowest cost dehydration process currently available for CO2, now used globally in CO2 transportation and sequestration. The company has carried out commercial CO2 purification projects as well as implemented projects feeding the largest carbon sequestration system in Canada, the latter of which is one of the largest of its kind currently in operation globally.

The company has partnered with the University of Guelph for the project ‘Understanding CO2 capture processes: a combination of reactive molecular simulation, thermodynamic modelling and experiments,’ which is funded by the Natural Sciences and Engineering Research Council of Canada under its International Strategic Partnership Program grant # STPGP 479466, running from 30 Sept. 2015 to 30 Sept. 2021.

Carbon capture, utilization and storage (CCUS) is a process of sequestering and recycling CO2 from emission sources and the atmosphere. CO2 is a major contributor to global warming and climate change. CCUS is just one of the many geoengineering ideas scientists are considering today.

During the capture stage, carbon is removed from the point source, such as flue gas emitted from industrial plants. According to the project, capturing CO2 when it is in a concentrated stream is much easier than a dilute one; however, modern technology has enabled the removal of CO2 that is already in the atmosphere. Once captured, carbon dioxide is compressed (turned into liquid form) and transported to storage sites via pipelines, ship or truck. Pipeline transport is the dominant method of transport but other methods may be chosen as seen appropriate with respect to health and safety.

Then, the utilization stage aims to make the most of this captured CO2 by looking at opportunities like conversion into useful chemicals, enhanced oil recovery (EOR), recovering untapped oil or alkaline remediation. This is accomplished by taking the combustion exhaust stream as raw material. Finally, in the storage stage, carbon dioxide is permanently stored underground by injecting it into rock formations several kilometers below the surface. This process is called geosequestration. The storage sites are chosen based on the vast amount of porous rocks they have underground. The CO2 injected will fill the pores between these rocks and is kept there by an impermeable layer covering it from above. This process is almost identical to how oil and gas is naturally stored underground.

There are different capture methods identified by the project. They are: pre-combustion (where carbon dioxide is captured and removed before fuel combustion), post-combustion (where CO2 is removed from the flue gas after a combustion process), post-production (when a desired product such as H2 or ethanol is produced and the product stream contains CO2, which must be removed), oxy-fuel combustion (similar to post-combustion process, except the fuel is combusted in oxygen instead of air) and direct air capture (which is basically the creation of an artificial plant that is much more efficient at removing CO2 from the surrounding air than real plants.)

Learn more about Gas Liquids Engineering Ltd, their history in the field and their wide-ranging work at their official website. Those interested may reach out to Tim Cayzer via email or phone to follow up on any further inquiries. Additionally, social media users may follow Gas Liquids Engineering Ltd on their preferred platforms in order to stay abreast of their latest activities, announcements and offers.

###

For more information about Gas Liquids Engineering Ltd, contact the company here:

Gas Liquids Engineering Ltd
Tim Cayzer
(403) 250-2950
info@gasliquids.com
2749 39 Ave NE, Calgary, AB T1Y 4T8

FacebookTwitterGoogleDiggRedditLinkedIn